84
Note On: When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it on.
Available Values: 0-127
Note Off: When Latch is active, the Clip button will send the MIDI note number with this
velocity when you press it to turn it off.
Available Values: 0-127
Saving a Preset
To store a Preset:
1. Press SHIFT and the Preset button to enter Edit Mode.
2. Edit a control as outlined in the Preset Edit Mode section of this guide.
3. Press the Preset button.
4. The display will show “SAVE?” with the following selections available.
• Cancel: Selecting “Yes” to Cancel will revert any changes made.
• Replace: Selecting “Yes” to Replace will write over the currently selected preset.
• Save As: Selecting “Yes” to Save As enable you to choose what number
“LOCATION” the preset will be and edit/change what the preset’s name “NAME” is.
The last available selection in the Save As screen is Save. Pressing “Yes” on the
Save screen will save your new preset.
Note: When editing a preset name, use the Encoder to scroll to a letter you want to
edit and press the Encoder to select the current letter. To erase a letter in a preset
name, press SHIFT and the Back button.
To Next Page
Loading...
