Oxygen Series User Guide 4
Windows XP and Windows Vista Installation Instructions
NOTE: Make sure your Oxygen keyboard is not connected to the computer when beginning the installation. The
following instructions will indicate when you should connect it to your computer.
1. Install the Oxygen Series drivers by doing one of the following:
Download the latest Oxygen Series drivers from the Support > Drivers page at www.m-audio.com. Once
you have saved the installer to your computer, double-click the file to start the installation process.
Select Oxygen Series from the menu and click "Install."
2. Follow the driver installer’s on-screen instructions. At various points in this installation process, you may be
notified that the driver being installed has not passed Windows Logo Testing, or asked whether the program
you wish to run is a trusted application. Click "Continue Anyway" (Windows XP) or "Install" (Windows
Vista) to proceed with the installation.
3. Once the installer has completed, click "Finish."
4. Connect your Oxygen Keyboard to an available USB port on your computer. If you are using Windows Vista,
your Oxygen keyboard is now ready to use. If you are using Windows XP, proceed with steps 5-8.
To Next Page
Loading...
Need help?
General
