7 User Guide Oxygen Series
MIDI Note Numbers
Appendix D - DirectLink Transport Control Assignments
Pro Tools 8 users can access additional functions via the Loop button:
1. Holding the Loop button while pressing one of the other Transport Control buttons gives access to additional Pro
Tools transport functions.
2.Quickly pressing the Loop button toggles the control knobs on your Oxygen keyboard between Instrument Mode
and Mixer mode.
• Mixer mode (default):, The 8 knobs control their corresponding tracks’ pan or balance settings.
• Instrument Mode: The 8 control knobs automatically map to 8 parameters on the active Instrument or Effect
Plug-In. The Instrument mode parameter mapping can be customized by clicking the "learn" button in the
upper right corner of the Plug-In. Please check the Pro Tools 8 documentation for more details.
Octave (n) Note Numbers
Cn C#n Dn D#n En Fn F#n Gn G# A A#n Bn
-1 0 1 234 5 67891011
0 12 13 14 15 16 17 18 19 20 21 22 23
1 24 25 26 27 28 29 30 31 32 33 34 35
2 36 37 38 39 40 41 42 43 44 45 46 47
3 48 49 50 51 52 53 54 55 56 57 58 59
4 60 61 62 63 64 65 66 67 68 69 70 71
5 72 73 74 75 76 77 78 79 80 81 82 83
6 84 85 86 87 88 89 90 91 92 93 94 95
7 96 97 98 99 100 101 102 103 104 105 106 107
8 108 109 110 111 112 113 114 115 116 117 118 119
9 120 121 122 123 124 125 126 127
Button Pro Tools Control Modified Button Pro Tools Control
LOOP* - - -
REW REW LOOP + REW Goto Start
FWD FWD LOOP + FWD Goto End
STOP STOP LOOP + STOP Undo
PLAY PLAY LOOP + PLAY Loop Play Mode
REC REC LOOP + REC Loop Record Mode
To Next Page
Loading...
Need help?
General
