Need help?Do you have a question about the M-Audio Studiophile DX4 and is the answer not in the manual?
General| Configuration | 2-Way |
|---|---|
| Woofer Size | 4" |
| Tweeter Size | 1" |
| HF Driver Type | Silk Dome |
| Amplifier Power (Woofer) | 20 W |
| Amplifier Power (Total) | 30 W |
| Inputs | 1/4" TRS, RCA |
| Enclosure Type | Bass Reflex |
| Type | Active Studio Monitor |
| LF Driver Type | Polypropylene |
Describes the 4-inch magnetically-shielded woofer with curved cone, high-temperature voice coil, and closed cell foam damping for balanced mid- and low-frequency response.
Details the 1-inch mylar dome tweeter with magnetic shielding, offering distortion-free sound and natural response with Optimage wave guide technology.
Explains the rear panel port designed to discharge extreme low frequencies below 60Hz for enhanced bass reproduction.
Details the components on the front panel of the Left Speaker, including drivers, power LED, volume control, and headphone jack.
Describes the connections and controls on the rear panel, including RCA/TRS inputs, Mid-Boost switch, speaker terminals, power receptacle, and power switch.
Provides essential handling and safety advice to prevent damage to the speakers during unpacking and setup.
Guides on how to connect the Left and Right speakers using the included spring-action speaker wire.
Explains how to connect the DX4s to computer sound cards or game consoles using RCA, TRS, or TS cables.
Describes the 2-position switch for selecting between a flat or boosted mid-range frequency response for different listening conditions.
Offers guidance on optimal speaker placement, including forming a triangle and aligning woofer height with ear level.
To Next Page
