SECTION II
INSTALLING O-RING
Check the O-ring Channel for obstruction, sand and other foreign objects.
An obstructed channel will result in leakage.
Pressing the O-ring into the O-ring Channel, roll finger over the O-ring while
holding opposite side in place with your other hand.
Close the Guardian Case to make sure the O-ring is engaged in the O-ring Channel.
Open the Guardian Case to make sure the O-ring is in place.
Note: An improperly engaged O-ring will leak and could result in damage to your Kindle.
Inspect O-ring before every use.
CONTINUED: STEPS AND PROCEDURES FOR PROPER O-RING FUNCTION
1
2
3
4
1 2
3
4
END: STEPS AND PROCEDURES FOR PROPER O-RING FUNCTION
To Next Page
Loading...