To Next PageTo Next PageWhy are none of the lights on my M.T.H. HO 4-6-6-4 Challenger?
The reason why none of the lights are on could be the same reason as 'One of my lights is out'. Also, check if the engine is getting power by checking the voltage on the track or moving the engine a few feet. Finally, ensure the Tender/Boiler drawbar connection is locked together.
General| Scale | HO |
|---|---|
| Type | Steam Locomotive |
| Manufacturer | M.T.H. |
| Power Type | Electric |
| Rail System | 2-Rail |
| Road Name | Union Pacific |
| Minimum Radius | 18 inches |
| Sound | Yes |
| Engine Type | 4-6-6-4 Challenger |
| Control System | DCS/DCC |
| Coupler | Scale |
Step-by-step guide for operating the engine with a standard DC power pack.
Instructions for operating the engine using a DCC system.
Steps for running the engine with the MTH DCS system.
Provides step-by-step instructions for connecting the engine and tender drawbar.
Guide on preparing and using the engine's smoke unit, including fluid addition.
Introduces the MTH DCS system and its advantages over DCC.
Turning smoke on/off and adjusting its volume remotely via DCC.
Steps for adding and starting the engine within the DCS system.
Explanation of MTH PS3.0 DCC CVs and their functions.
How to set up short and long DCC addresses using CV29.
Instructions for setting up and configuring multiple engines to run as a consist.
Solutions for common issues encountered in Analog DC mode.
Troubleshooting steps for lighting and movement problems in Analog DC.
Solutions for startup and sound problems in DCC mode.
Troubleshooting smoke, lighting, and movement problems in DCC.
Solutions for startup and sound problems in DCS mode.
Troubleshooting smoke, lights, motion, PFA, and shutdown in DCS.
Steps and guidelines for getting service under the limited one-year warranty.
Details the conditions, exclusions, and duration of the limited one-year warranty.
