ME401-2
M-Tec ME401-2, Technical Manual v.1.3a, September 2012 Page 22
Approvals and certificates
The ME401 product is certified according to the following recommendations:
FCC
The ME401 product complies with FCC Part 15, FCC Part 24, and Industry Canada
requirements.
The ME401 product complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
EEC/ International
• The ME401 product complies with the essential requirements of the Automotive
Directive 2004/104/EEC - UN regulative ECE R10 EMC rev. 3
• The ME401 product complies with the essential requirements of the Directive
2003/37/EEC and Directive 2006/42/EEC
• The ME401 product complies with the essential requirements of the R&TTE
directive 1999/05/EEC directive with respect to the EMC requirements, safety and
radio spectrum matters.
Including:
ISO 13309:2010 Construction machinery
ISO 13766:2006 Earth-moving machinery
EN/ISO 14982:2010 Agricultural and forestry machines
EN/IEC 60950-1:2009 +
A11, A1 and A12 ITE Safety
EN/ISO 50121-3-2:2006 EMC for apparatus on rolling stock
And environmental:
EN/IEC 60068-2-1:2007 Cold
EN/IEC 60068-2-2:2007 Dry Heat
EN/IEC 60068-2-27 Shock
EN/IEC 60068-2-64 Random vibration
EN/IEC 60068-2-78:2001 Damp heat steady state
To Next Page