To Next Page

To Previous Page

 Possibility of run unique application software (for ex. Modbus TCP master,

Modbus RTU RS485 or RS232 interface, M-BUS master)  data query, store;

data sending recurring in cycles – this affects in any case of changes ont he

mobile network or through the Ethernet interface

 Mapping Modbus registers to the unique SNMP registers: The management

application refresh continously the SNMP registers’ convenient data. After writing

the defined SNMP register the data will paste into the PLC thourgh the Modbus

TCP.

 Manage option at the WM-M2M® User Interface (GUI) or across the SNMP

protocol

 Configuration at the local Web site or at the remote Web site or across the

SNMP protocol

 Store the current configuration in a data file which can be save (backup) or

restore

 Unique SNMP registers:

 GSM cell ID

 Signal strength

 bordering cell strength

 number of PPP reconnections

 inactive PPP time interval (offline)

 status of PLC availability

 status information of PLC register

 TCP-write registers of the PLC Modbus

 Time synchronisation

 Time synchronization in the direction of PLC

 Store operation log files

 Remote management, option for the remote software update (through

the WM-M2M Ftp function across the serial/Ethernet port through mobile

network (remotely))

M2M Pro User Manual

Questions and Answers: