The MA 2Port Node and MA 4Port Node in WM -version allows the conversion of DMX via different
protocols to DMX 512, using Ethernet. The MA 2/4Port Node features 1Gbit capability und fit
perfectly into the MA system which is based on this high speed to ensure maximum performance.
Optimised for touring and installations purposes, both have a rugged steel housing for a long life
even under harsh conditions. The panel offers a menu button and a 2” colour TFT as well as four
LEDs displaying the current status. Additionally there is a USB –port for optionally update of
firmware via USB-stick. The etherCON connectors and two or four DMX ports complete the device.
The MA 2/4Port Node WM is fully configurable from the grandMA2 consoles. To achieve the highest
flexibility, each DMX port can be individually configured as DMX-in or DMX-out.
To Next Page
Loading...