Need help?Do you have a question about the MA 2Port Node WM and is the answer not in the manual?
General| Brand | MA |
|---|---|
| Model | 2Port Node WM |
| Category | Music Mixer |
| Language | English |
Describes the MA 2Port and 4Port Node WM's role in DMX conversion via Ethernet and its 1Gbit capability.
Details the intended applications and provides manufacturer contact information for support.
Provides the physical dimensions and approximate weight of the MA 2/4Port Node WM.
Details the Ethernet RJ45, USB port, and the 2" TFT color monitor specifications.
Explains that power is supplied via Power Over Ethernet (PoE) and switch requirements.
Provides instructions on handling the device during transport, including weight awareness and protective measures.
Explains the meaning of warning symbols related to danger areas and proper disposal of hazardous waste.
Covers essential safety guidelines for operation, including avoiding water, ensuring ventilation, and proper handling.
Lists conditions that require immediate disconnection and contacting technical support, such as liquid penetration or damage.
Specifies the operational and storage temperature and humidity limits for the device.
Outlines environmental requirements, including indoor use, dust-free air, and protection from water.
Details the process for rig installation with an RJ45 adaptor and wall mounting.
Emphasizes the importance of unobstructed cooling holes for preventing overheating and malfunction.
Describes the RJ45 Ethernet socket for network connection/PoE and the USB socket for updates.
Explains the 2" monitor, DMX ports, MENU button, and the status indicated by POWER, LINK, DATA, and BOOT LEDs.
Details the information shown on the 2-Port Node display, including version, IP address, and DMX port configuration.
Explains the 4-Port Node display and configuration modes like Select Mode, Info Mode, Identify, Reset, and Restore.
Provides step-by-step instructions for updating the firmware using a USB stick.
Details the procedure for updating the firmware from a grandMA2 console over the network.
Guides through the basic steps to start up the MA 2/4Port Node and connect it to a grandMA2 console.
Explains how to save and load device configurations using the grandMA2 console.
Provides instructions for cleaning the MA 2/4Port Node surface and ventilation holes.
States that the unit requires no regular maintenance and should be serviced by qualified personnel.
Lists the safety, EMC, and ROHS standards to which the MA 2Port/4Port Node WM conforms.
Describes the grandMA2 onPC software, its capabilities, and how it complements the hardware.
Introduces other MA Lighting consoles like grandMA2 full-size, light, ultralight, and faderwing.
Provides fields for recording the device model, serial number, year of manufacture, and distributor.
To Next Page
