Connectivity
To remove the plug, press the locking tab down
RJ45 Ethernet socket Network connection and power supply (PoE)
2” monitor Displays important functions
2 / 4 x DMX (XLR 5 pin) Ports can be configured to DMX IN or DMX OUT
USB socket To update via USB-stick - do not connect peripherals –mouse, keyboard, etc.!
MENU –button To switch the menu and setting of parameters (see also Quickstart ON/OFF)
POWER-LED green Steady = device is ready
LINK-LED green Steady = light signals correct connection to onPC or console
DATA-LED green Flashes = data-traffic
BOOT-LED red Lights during the boot process
To Next Page
Loading...