MA 2Port Node WM - Data and Power Requirements; Power Supply via Ethernet

MA 2/4 Port WM
Data
Transport
Safety
instructions
Safety and
environment
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
26
Data
Current: Not required. Power is supplied through “Power Over Ethernet“.
Ethernet cable not included ex works.
The switch must correspond to PoE-capable (IEEE802.3af
standard. / 350mA) and the Performance Class 3. Alternatively, a
corresponding PoE-Injector 1Gbit/s is possible. Note: cable supply
line length of max. 75m / 240 ft.