MA Digital Dimmer User Manual

Digital Dimmer
User´s Manual
Version 1.40

MA Digital Dimmer Specifications

General

Brand	MA
Model	Digital Dimmer
Category	Dimmer
Language	English

Summary

2. Quick Manual / Function and Controls

3. Overview of Functions

4. The Menus

4.1 The Top Menu

4.2 The Channel Menu (2nd Menu)

4.3 The Memory Menu (3rd Menu)

4.4 The Setup Menu (Supervisor Menu)

4.4.1 DMX Fail (reaction when DMX signal stops)

Configures how the dimmer responds when the DMX signal is lost.

4.4.2 DMX MODE (different DMX operating modes)

Selects the DMX operational mode, such as Single, Block, or 2Cha.

4.4.3 DMX/MIDI (switch between DMX and MIDI input)

4.4.7 DELETE ALL (set all to default)

Resets all dimmer settings, memories, and configurations to factory defaults.

4.4.8. and 4.4.9 CURVE USER (User definable control curves)

5. Starting the Dimmer

5.1 Mains Supply and earthing

Details the required mains power connection and earthing procedures.

5.3 Overvoltage

5.4 DMX Connections

5.5 Analogue Input (0...10 Volt)

7. In- and Outputs

7.1 DMX In- and Output

Conforms to USITT DMX 512 standard; details pinout and termination requirements.

7.2 Analogue Input (0...10 Volt)

7.4 Link In- and Output

7.5 Power Supply

Cross-references to Section 5.1 for detailed mains power supply information.

7.6 Load Output

8. Opening the Dimmer (Service)

9. Safety Instructions