The grandMA3 I/O Node must be protected from environmental factors such as physical shocks and vibration during
transportation;
Remove all cables before transport;
The user is responsible for securely fastening the products for transport and for following the manufacturer's safety instructions
when transporting the device;
Noncompliance with the safety instructions can result in personal injury or material damage;
Do not place the grandMA3 I/O Node on unstable surfaces;
Do not place any objects on top of the grandMA3 I/O Node.
Warning:
Pay attention to temperature and humidity during transport. For more information see Limitations.
After the transport check the device.
If the device is damaged (dented, bent, or broken), do not connect the grandMA3 I/O Node to power!
To Next Page
Loading...