Temperature
Operation:
I/O Nodes: 0 °C up to 40 °C / 32 °F up to 104 °F
I/O Nodes DIN-Rail: -10 °C up to +50 °C / 14 °F up to 122 °F
Caution:
Higher temperatures can stress the cooling system of the device and destroy hardware components.
Storage / Transport: -10 °C up to +50 °C / 14 °F up to 122 °F
Humidity
Operation: 20 % up to 90 % relative humidity (no condensation)
Storage / Transport: 10 % up to 90 % relative humidity (no condensation)
Environment
Follow all safety instructions;
Only use the device within its operating limits;
Only use the device indoors;
Air must be free of dust and any hazardous or explosive substances;
Avoid jolting;
This device is not protected against splash water. Do not use it near water;
Do not use the device in rain or moisture;
Do not place the device where it can come in contact with corrosive gases or saline air as this can cause maloperation.
To Next Page
Loading...