To Next PageTo Next Page
Need help?Do you have a question about the MAAX 10011916 and is the answer not in the manual?
General| Brand | MAAX |
|---|---|
| Model | 10011916 |
| Category | Bathroom Aid |
| Language | English |
Procedure for building the structural frame for the unit to ensure proper fitting.
Guidance on installing all plumbing and drainage before securing the unit.
Instructions for leveling the unit to provide support and facilitate drainage.
Ensuring the floor is strong enough to support the unit's weight.
Steps for marking and drilling holes for faucet installation.
Guidance on placing the faucets at the recommended height.
Instructions for filling the tub and inspecting for leaks before final installation.
Instructions for constructing the island frame according to dimensions.
Securing the bathtub to the island and floor using wood blocks.
Connecting plumbing, ensuring all joints are waterproof.
Installing the finish covering and sealing joints with silicone sealant.
Instructions for constructing the alcove frame based on provided dimensions.
Securing the bathtub in the alcove frame using wood studs and screws.
Connecting plumbing systems according to local standards and guide rules.
Applying wall finish and sealing joints with silicone.
Installation instructions for specific apron models, including important spacing considerations.
Completing floor finish and installing extensions, ensuring proper apron alignment.
Positioning, tracing, and securing the apron using screws and anchors.
Constructing the shower alcove frame according to dimensions and specifications.
Reassembling sectional units and applying silicone between flanges before installation.
Positioning the unit in the frame and drilling holes for secure fastening.
Adding wood pieces to reinforce unit walls and ensure structural integrity.
Connecting plumbing according to local standards and guide rules.
Applying wall finish to cover fastening flanges and sealing the seam with silicone.
Constructing the frame, installing additional studs, and positioning the base.
Installing the drain, applying cement, and checking for levelness and proper drainage.
Fastening the base and preparing walls for plumbing connections.
Conditions under which the warranty does not apply.
Specific warranty terms and period for commercial use.
