55
Program selection
Water level (load size)
Temperatures
Washing intensity
Operation sequence:
1
2
3
4
Control panel Model LMH20186ZGGT
5
5
Spin level
Personal touch
Start/pause
6
6
1
2
3
4
7
7
8
8
To start operation touch the on/ off button . Turn knob 1 and stop when the program
indicator of your choice lights up. Push buttons 2, 3, 4 and 5 to select the different
washing options depending on your wash load. Push the start/pause button.
Turn the knob to switch between the
available programs according to the
type of laundry. Use the cycles
recommended for each type of
clothes to obtain top performance in
washing and care for your clothes.
Note: As this washing machine saves
a great amount of water, you will notice
that the clothes are not completely
submerged in water. This is normal.
The water level is related to the size of
the load you intend to wash. There are
4 load sizes and an automatic sensor.
Select the one you need or let the
automatic sensor do it for you.
Select between the 4 temperature
levels of the washing water or let the
automatic sensor decide according to
the selected program (automatic
sensor position).
There are 4 levels of washing
intensity and an automatic level. The
washing intensity lets you prolong or
reduce the stir rate. See the chart
labeled ´washing cycle description´ to
better know the predetermined times
and their options. Select the intensity
that your clothes need or let the
automatic sensor do it for you.
Select the most convenient spin level
between the 4 available or let the
automatic sensor do it for you based
on the program selected.
Repeatedly press the selection
button to choose the separate wash
cycle stages or the combination of
stages that you requiere to only
wash, only rinse, wash and spin, etc.
The lights will turn on to indicate the
selected features.
You will be able to start your washer or
pause it once in operation.
Note: when starting the wash cycle you
will be able to hear a tune that indicates
that your washer is ready followed by a
sound from the lid safety latch. To restart
the cycles verify that the lid is well closed
and push the start/pause button again.
Alarm
By just pressing it, this button allows you
to activate or deactivate the end-of-cycle
alarm that consists of an audible signal
once your washing machine completes
the wash cycle. Once the alarm is
activated, the alarm will turn on a red
led on the washing machine display.
To Next Page
Loading...
