mabe CLME71214BAT User Manual

11
options (on some models)
Pre-Soak15mins.-This option begins with a
brief agitation, soaks for this specied period of
time, then moves through the rest of the cycle
automatically.
2
nd
 Rinse - When you use extra detergent or
bleach to clean heavily soiled clothes, use the
2
nd
Rinse option to better remove additional
residues.
Pre-Soak+2
nd
Rinse- Turns both options on.
Off- Turns these options off.
start
Pressstartto begin the cycle. With the lid closed pressing start again
will pause the cycle andstatus lights will blink.
To continue the cycle, close the lid and press startagain. The water ll
will continue with the lid opened, except when precisell (on some
models) is selected as the load size. The lid must be closed to continue
lling when precisell(on some models) is selected.
If the lid is opened during the cycle, the cycle will pause and the status
lights will blink. To resume the cycle, close the lid and press start.
If the machine is paused for more than 24 hours, the cycle will be
cancelled. To stop the cycle, turn the Cycle Selector to the Off position.
note: Machine will automatically cancel and drain when water is present
and the lid is left open for 15 minutes or the unit is left in a paused state
for 24 hours with the lid closed. Select cycle and press start to begin
new cycle.

mabe CLME71214BAT Specifications

General

Brand	mabe
Model	CLME71214BAT
Category	Washer
Language	English