mabe CLME71214BAT User Manual

10
deep rinse
Set this option when adding fabric softener to the washer.
status lights
Thestatus lights show the stage the washer is in. When the selector knob
is set to a new cycle, thestatus lights will ash momentarily, showing
the stages the cycle will go through.
note: If thestatus lights are blinking, the operation of the washer has
been paused. To resume operation press the start button (the lid must
be closed).
temperature
Select the water temperature for the washer cycle (all rinses use cold
water). Always follow fabric manufacturer’s care label or instructions
when laundering.
tapcold* uses incoming tap water, which can provide energy savings.
For all other temperature selections, a mixture of hot and cold water
is used to achieve the ideal temperature for each temperature setting.
* Please note that some detergents do not fully dissolve in very cold
water. If you experience this, it is recommended you choose a setting
other than tapcold.
load size (on some models)
Loosely load clothes no higher than the top row of
holes in the washer basket.
precisell - This selection automatically provides
the correct amount of water suited to the size and
type of load placed in the unit.
If you prefer to manually select the water level,
select Small through Super. While Precise Fill is best for most loads and
general washing, you may want to manually select the load size for
specialty items such as bulky, lightweight comforters or pillows, where
you want to ensure a larger water level is applied. Manual load size
selections should be made for wet items placed in the washer, such as
soaked towels or garments.
status light illuminates
on
When the fabric softener option has been selected.
wash
When the washer is in the wash portion of the cycle.
rinse
When the washer is in the rinse portion of the cycle.
spin When the washer is draining and/or spinning.
lid locked
When the washer lid is locked. This feature prevents
the lid from being opened while the washer is in
the spin cycle or coasting to a stop.

mabe CLME71214BAT Specifications

General

Brand	mabe
Model	CLME71214BAT
Category	Washer
Language	English