mabe EML27WWF0 - Disassembly and Retrofit Procedures; Power Cord Installation

Ingeniería de Servicio
45
Disassemble and retrofit
Power cord
To install the power cord, remove the
cover element located at the back of
the appliance.
A) Remove the ¼” screws with a box
screwdriver.
B) Lift the lid and slide it to the left to
release the flanges support.
A
A
B
Componente view
Insert the power cord through the hole in
the base and using a box screwdriver,
remove the ¼” screws to place the power
cord.