To Next PageTo Next Page
Need help?Do you have a question about the mabe EML27WWF0 and is the answer not in the manual?
General| Type | Freestanding |
|---|---|
| Number of Burners | 4 |
| Color | White |
| Cooktop Surface | Porcelain |
| Oven Cleaning | Manual Clean |
| Convection Oven | No |
| Power Source | Gas |
| Voltage | 120V |
Information directed to service individuals about potential risks and responsibilities.
Disconnect power before servicing and ensure proper grounding devices are reconnected.
Lists models with 4 coil burners, including specific series like EML27NXF0A.
Lists models with 4 radiant burners and a dual element, e.g., EML27WWF0A.
Lists models with 5 radiant burners and true convection air, e.g., EML835BBF0A.
Highlights features like back protector, sensors, triple ring elements, and oven capacity.
Covers reading instructions, codes, installer responsibilities, and electrical safety warnings.
Instructions for securing the range with an anti-tip bracket to prevent tipping.
Guides on how to properly level the appliance using leveling legs.
Verifies secure bracket, removed packaging, and parallel door/drawer operation.
Checks burner operation, clock display, control positions, and locates the rating plate.
Guides on setting the oven to start immediately and stop automatically after a set time.
Instructions on programming the oven to start and stop automatically at a later time.
Details how to set the oven for multi-rack or single-rack convection baking/roasting.
Warns about fire hazards, recommends kitchen venting, and lists items to remove.
Guides on selecting self-clean time, starting the cycle, and understanding door lock behavior.
Explains how to stop the cycle, conditions for unlocking the door, and error indicators.
Describes the steam clean cycle for light soiling and preparation steps.
Instructions on removing racks, adding water, closing the door, and starting the cycle.
Details cycle completion, unlatching, cleaning residue, and drying the oven.
Step-by-step guide for installing the power cord, including removing cover elements and screws.
Guides on removing brake pads and box screws to replace oven heating elements.
Presents the schematic diagram for EML27/JBS27 models, including wire colors and element resistances.
Provides the schematic diagram for EML535/JCB535 models, detailing components and wiring.
Presents the schematic diagram for EML735/JCB735 models, including element wattages and resistances.
Provides the schematic diagram for EML835/JCB835 models, detailing elements and resistances.
Guides on testing the key panel, verifying audible tones and display feedback for each function.
Addresses problems like units not maintaining boil, not working, or stopping glowing, and cooktop scratches/discoloration.
Covers issues like plastic melting, pitting, frequent cycling, and non-working oven light.
Addresses oven not working, overheating, and food not baking/roasting properly.
Covers oven temperature too hot/cold, crooked door, and clock/timer malfunctions.
Addresses oven not self-cleaning, probe connection problems, and control lockout.
Addresses cracking sounds, smoking, door not opening, and unclean ovens after cycles.
Guides on handling 'LOCKED' display, 'F' error codes, and resetting after power issues.
Covers range locked display, incorrect control signals, and blank/flashing displays.
