mabe EML27WWF0 - Appliance Performance Troubleshooting; Cooktop Surface and Oven Light Problems; Oven Operation and Baking Issues

Ingeniería de Servicio
68
Hot surface on a model
with a light-colored
cooktop.
This is normal. The surface may appear
discolored when it is hot. This is
temporary and will disappear as the
glass cools.
Plastic melted to the
surface
Hot cooktop came into
contact with plastic placed
on the hot cooktop.
See the Glass surface potential for
permanent damage
Pitting (or indentation) of
the cooktop
Hot sugar mixture spilled
on the cooktop.
Call a qualified technician for
replacement.
Frequent cycling off and
on of surface units
Improper cookware being
used.
Use only flat cookware to minimize
cycling.
Oven light does not work
Light bulb is loose.
Tighten or replace the bulb.
Oven will not work
Plug on range is not
completely inserted in the
electrical outlet.
Make sure electrical plug is plugged into
a live, properly grounded outlet.
A fuse in your home may
be blown or the circuit
breaker tripped.
Replace the fuse or reset the circuit
breaker.
Oven controls improperly
set.
See the Using the oven section.
Oven too hot.
Allow the oven to cool to below locking
temperature.
Food does not bake or
roast properly
Oven controls improperly
set.
Make sure you touch the BROIL HI/LO
pad.
Improper rack position
being used.
See the Broiling Guide.
Cookware not suited for
broiling.
For best results, use a pan designed for
broiling.