Mac Afric CUT 40 User Manual

PLASMA CUTTER
OWNER`S MANUAL
MODEL : CUT 40/60
(POWER v-MOS CONTROLIED, PLASMA CUTTING POWER SUPPLY)

Mac Afric CUT 40 Specifications

General

Brand	Mac Afric
Model	CUT 40
Category	Welding System
Language	English

Summary

Products Introduction

Main Technical Data

Panel Explanation

CUT 40 Control Panel

Diagram and explanation of the control panel for the CUT 40 model.

CUT 60 Control Panel

Diagram and explanation of the control panel for the CUT 60 model.

Installation

Air Regulator Installation and Operation

Step-by-step guide for installing and operating the air regulator.

Input Cable Connection

Instructions for connecting the input power cable to the cutting machine.

Output Cable Connection

Instructions for connecting the output cables, including air and torch.

Operation Steps

Procedure for operating the plasma cutting machine after installation.

Operation

Operation Environment

Details on the ideal environmental conditions for operating the plasma cutter.

Safety Precautions

Important safety guidelines for operating the plasma cutting machine.

Cutting Notes

Maintenance and Check Trouble

Maintenance Procedures

Regular maintenance tasks to keep the cutting machine in good condition.

Check Fault