Mac Afric MGENER-550 - Pilot Lamp; DC Terminals; DC Circuit Protector

Pilot Lamp
The pilot lamp is illuminated when the generator is operating normally.
DC Terminals
The DC terminals may ONLY be used for charging 12 volt automotive type batteries.
The
terminals are colored red to identify the positive(+) terminal and black to identify the negative(-) terminal. The battery must be connected
to the generator
DC terminals with the proper polarity (battery positive to generator red terminal and battery negative to the generator black
terminal.)
DC Circuit Protector
The DC circuit protector automatically shuts off the DC battery charging circuit when the generator is overloaded, when there is a problem with
the battery or the connections between the
battery and the generator are improper.
DC circuit protector
©
Ground terminal
circuit breaker
0
+
DC 12
12