MCSWP2000S-2
13
EN
Getting
started...
Switch the product off and disconnect it from the
power supply before assembly, cleaning, adjustments,
maintenance, storage and transportation.
Wear protective, slip-resistant footwear.
Wear safety helmet!
Wear face protection!
Remove plug from the mains immediately if the cable is
damaged or cut.
Tip contact may cause the guide bar to move suddenly
upward and backwards what may cause serious injury to
user.
Contact of the guide bar tip with any object should be
avoided.
Do not expose the product to rain or wet conditions.
Oil tank for chain oil.
Always use the product with two hands. Do not use
one handed when operating the product.
Wear protective gloves.
Saw chain tensioning.
Correct direction of cutting-teeth.
Safety information
Symbol explanation
To Next Page
