Mac allister MCSWP2000S-2 - Technical Specifications

46
MCSWP2000S-2
In
more
detail...
EN
Technical specications
Technical specications
The sound values have been determined according to noise test
code given in EN60745-1, using the basic standards EN ISO 3744
and EN ISO 11203.
The sound intensity level for the operator may exceed 80dB(A) and
ear protection measures are necessary.
The declared vibration value has been measured in accordance with
a standard test method (according to EN 60745-1 and EN 60745-
2-13) and may be used for comparing one product with another.
The declared vibration value may also be used in a preliminary
assessment of exposure.
> Rated voltage, frequency
> Rated power input
> Rated no load speed n
0
> Protection class
> Weight
> Cutting length:
> Guide bar length:
> Guide bar type:
> Saw chain type:
> Chain speed:
> Volume of oil tank:
> Chain oil type
> Sound pressure level L
pA
> Sound power level L
WA
> Uncertainty K
pA
, K
WA
> Guaranteed sound power level L
WA
> Front handle a
h
> Rear handle a
h
> Uncertainty K
General
Sound values
Hand arm vibrationvalues
220 –240 V~ ,50 Hz
2000 W
8238 min
-1
||
approx. 6.4 kg
320 mm
400 mm (16”)
OREGON 160SDEA041
OREGON 91P056X
13.5 m/s
200 ml
SAE #32 in summer and
SAE #32 in winter
92.75dB (A)
103.75 dB(A)
2.5 dB(A)
107 dB(A)
5.098 m/s
2
5.978 m/s
2
1.5 m/s
2