119
Managing Incoming Calls
When connected to a Bluetooth® mobile phone, the unit will mute audio output, pause CD play,
and change to the Bluetooth® screen below when a call is received. The incoming phone number
or assigned name for that number will appear on the screen. An audible tone will sound from the
unit and a graphic display will appear on the front panel.
Bluetooth Incoming Call Screen
1.
icon: Touch to answer an incoming call.
2.
icon: Touch to end an incoming call.
Making an Outgoing Call
Outgoing calls can be performed in two manners. The outgoing call can be direct dialed using the
front panel keypad or by touching either the Phonebook or Call History icons, selecting a name
and touching the phone number.
Direct Dialing:
1. Press the front panel MENU button and then touch the BLUETOOTH icon to access the
Bluetooth® main menu. The following screen will appear:
Bluetooth Direct Dial Screen
2. Use the 0-9, */+, and # icons to input the phone number. If necessary touch the green arrow icon
to clear the last digit or the entire number and start over.
3. After entering the phone number, touch the
icon to dial the call. The number dialed will be
displayed on the screen.
4. To end the call, touch the
icon.
To Next Page
Loading...
Need help?
General
