MAC Audio SOUNDBAR 550

17
USE YOUR SOUNDBAR
This section helps you use the Soundbar to
play audio from connected devices.
Before you start
• Make the necessary connections described
in the user manual.
• Switch the Soundbar to the correct source
for other devices.
Adjust the volume
• Press +/- (Volume) to increase or decrease
the volume level.
• To mute the sound, press MUTE on the
remote control.
• When mute is on, the LED blinks red.
• To restore the sound, press MUTE again or
press +/-.
Note
The volume might be influenced by MP3 or
Bluethooth player.
Play audio through Bluetooth
Through Bluetooth, connect the Soundbar with
your Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and
then listen to the audio files on your device
through your Soundbar speakers.
The operational range between the
Soundbar and a Bluetooth device is
approximately 10 meters (30 feet).
• On the Bluetooth device, switch on
Bluetooth, search for and select
MacAudioSoundbar550 (see the user
manual of the Bluetooth device on how to
enable Bluetooth).
• Select and play audio files or music on your
Bluetooth device.
• During play, if a call is coming, music play is
paused. Play resumes when the call ends.
• To exit Bluetooth, select other source.
• When you switch back to Bluetooth mode,
the Bluetooth connection remains active.
• Press and hold the PLAY/PAUSE button to
disconnect the current connection.
Note
The music streaming may be interrupted
by obstacles between the device and the
Soundbar, such as wall, metallic casing that
covers the device, or other devices nearby that
operate in the same frequency.
If you want to connect your Soundbar with
another Bluetooth device, press and hold the
PLAY/PAUSE button to disconnect the current
connection.
Auto Standby
When playing media from a connected device,
the Soundbar automatically switches to
standby after 15 minutes if no audio play is
started from a connected device.