MAC PARA Muse 3 - Technical SPECIFICATIONS; Harness

10
TECHNICAL SPECIFICATIONS
Category Intermediate
Muse
3
Muse
3
Muse
3
Muse
3
size 24 (S) 26 (M) 28 (L) 31 (XL)
Zoom flat [%] 92 95,7 100 104,5
Area flat
[m
2
]
23,75 25,7 28,06 30,64
Area projected
[m
2
]
21,78 23,56 25,73 28,1
Span flat [m] 10,90 11,34 11,85 12,38
Aspect ratio flat - 5,0 5,0 5,0 5,0
Root cord [m] 2,69 2,79 2,92 3,05
Cells - 45 45 45 45
Weight [kg] 4,95 5,1 5,3 5,6
Weight range* [kg] 67-85 75-95 85-110 105-135
Min.speed [km/h] 23-25 23-25 23-25 23-25
Trim.speed [km/h] 36-38 36-38 36-38 36-38
Max. speed (accelerator) [km/h] 45-47 45-47 45-47 45-47
Glide ratio - 8,3 8,3 8,3 8,3
Min. Sink rate [m/s] 1,05 1,05 1,05 1,05
* Pilot + approx. 17 to 20kg of equipment (including wing)
HARNESS
The Muse 3 is certified with LTF GH type certified harnesses. Nearly all harnesses
available on the market are „GH“.
These “GH“harnesses are different to “GX“ harnesses, which have a lower attachment
point for the main karabiners and effective cross bracing. The Muse 3 was not tested
with harnesses with an effective cross bracing system.
Any certified harness with a hang point at about chest height may be used with the
Muse 3 (37-50cm over seat plate). The distance between left and right main karabiners
should be between 45 and 60cm, depending on the size of the pilot and the type of the
harness. Please note: the hang point position changes the position of the brakes relative
to the pilot's body.