1 2106 East Indiana Ave., Bismarck, ND 58504 U.S.A. • www.macheaters.com • +1-800-272-4604
MAC 6000 Hydronic Heater
Specifications
MAC 6000
2106 East Indiana Ave., Bismarck, ND 58504, U.S.A. www.macheaters.com +1.800.272.4604
Page 7
MAC 6000 – SPECIFICATIONS
Imperial Metric
Heating Power Gross Input: 630,000 BTU/Hour 185 kW/Hour
Combustion Efficiency: 86% 86%
Engine/Genset(Isuzu): 10 hp/8 kW 7.46 kW/ 8 kW
Hose Length: 3,000 ft
6 x 500 ft
25 - 45 psi
915 m
172 - 310 kPa
1,500 GPH 5,678 LPH
225 US Gallons 852 Liters
4.5 GPH + 0.65 GPH 17 LPH + 2.46 LPH
w/genset w/genset
65° - 185° F 18° - 85° C
186 IN x 96 IN x 92 IN 4,724 mm x 2,438 mm x 2,337 mm
3,466 kg (dry)
7,640 lbs (dry)
10,440 lbs (wet)
4,736 kg (wet)
2-5/16 IN Ball hitch coupler
Powder coat
Powder coat
Hose Pressure:
HTF Flow Rate:
Fuel Capacity:
Fuel Rate:
Operating Temperature:
Dimensions (L x W x H):
Weight:
Hitch (Trailer Mounted):
Finish-Interior
Finish-Exterior
Construction:
Fabricated steel, fully enclosed, with forklift tubes
and crane lifting points
Run Time:
Hose Rewind:
56 hrs @ 75%
78 hrs @ 50%
AC motor
Fuel: #1 Diesel (below 32
o
F/0
o
C), #2 Diesel
Engine Controls: PLC based operation
Heat Transfer Fluid (HTF): Propylene Glycol - JEFFCOOL P155
6 x 153 m
To Next Page
Loading...