MAC3 PresSystem - Removing Keyboard Cable and Board

manual utilizare presostat electronic
pressystem
34
in protectia Lipsa Apa.
a) Daca se apasa butonul EDIT,
valoarea va fi inregistrata
permanent.
b) Daca se apasa butonul ON/OFF,
valoarea nu este salvata si se
poate iesi din meniu.
NB: Daca presiunea nu a fost
modificata in prealabil, valoarea afisata
este valoarea maxima a presiunii
instalatiei masurata in mod automat de
catre PresSystem.
Daca valoarea presiunii maxime este
schimbata de utilizator, aceasta nu va
fi actualizata in mod automat de
catre PresSystem.
value of dry running pressure.
a) If the EDIT button is pressed the
value will be stored permanently
b) If the ON/OFF button is pressed
the value will not be stored and it is
possible to exit without saving.
NB: NB: If the pressure has not been
previously modified, the value
displayed is the maximum pressure of
system acquired automatically by the
device.
If the maximum pressure is changed
by the user, this will not be managed
automatically by the device.
7
LED PR.RESTART:
 Led Activ: afiseaza presiunea minima
(de repornire). Daca este apasat
butonul EDIT, presiunea minima poate
fi modificata
 Led Stins: nici o actiune
 Led Intermitent: presiunea minima
poate fi modificata cu butoanele + / -
a) Daca se apasa butonul EDIT,
valoarea va fi inregistrata
permanent.
b) Daca se apasa butonul ON/OFF,
se iese din setare fara salvarea
valorii.
LED PR.RESTART:
 Led On: displays the restart pressure.
If the EDIT button is pressed, the
restart pressure can be modified
 Led Off: no action
 Led Blinking: the restart pressure can
be modified by using the + / - buttons.
a) If the EDIT button is pressed the
value will be stored permanently
b) If the ON/OFF button is pressed
the value will not be stored and it is
possible to exit without saving.
8
LED DRY RUNNING
 Led Activ: afiseaza presiunea minima
sub care se intra in protectia Lipsa
Apa. Daca este apasat butonul EDIT,
presiunea minima poate fi modificata.
 Led Stins: nici o actiune
LED DRY RUNNING
 Led On: displays the pressure below
will be the dry running alarm. If the
EDIT button is pressed, the restart
pressure can be modified