EN
20
In
more
detail...
MHT55050
by MacAllister
Fig. 8
1
Fig. 9
1. Switch the product off, disconnect the product from the power supply and let
it cool down.
2. Attach the blade cover (11) if necessary.
3. Check, clean and store the product as described below.
Operation / Care and maintenance
After use
The golden rules for care
WARNING!
This operation must only be performed when the blades
have stopped running and the product is switched off!
WARNING!
Always switch the product off, disconnect the plug from
the power supply. Let the product cool down before performing
inspection, maintenance and cleaning work!
10. Lubricate the internal surfaces of the blade if the cutting device (blade) (1)
overheats during operation (Fig. 9).
To Next Page
Loading...