What to do if my MacAllister Trimmer does not start?
If your MacAllister Trimmer isn't starting, first ensure it's properly connected to a power supply. If it is, a defective power cord or plug, or another electrical issue within the product, might be the cause. It's recommended to have it checked by a qualified electrician.
Why is my MacAllister MHT55050 making excessive noise or vibrating?
Excessive vibration or noise in your MacAllister Trimmer can often be attributed to a dull or damaged blade, or loose bolts and nuts. Try replacing the blade with a new one, and ensure all bolts and nuts are properly tightened.
Why doesn't my MacAllister MHT55050 Trimmer reach full power?
If your MacAllister Trimmer isn't reaching its full power, the extension cord you're using might not be suitable for the product. Try using a proper extension cord. Alternatively, the power source, such as a generator, might have too low voltage; in that case, connect the trimmer to another power source. Blocked air vents can also reduce power, so make sure to clean them.
How to improve unsatisfactory results with my MacAllister Trimmer?
An unsatisfactory result with your MacAllister Trimmer can be due to a worn or damaged blade. Replacing it with a new one should solve the problem. Also, ensure that you are only cutting branches that comply with the capacity of the trimmer; branches that are too thick can also lead to poor results.
Covers work area, electrical, and general power tool safety precautions.
Advice on alertness, PPE, proper attire, and preventing accidental starts.
Blade safety, carrying, storage, electrical hazards, and environmental precautions.
Reducing exposure to vibration/noise and emergency preparedness.
Awareness of remaining dangers, plus symbols and abbreviations.
Identification and description of the hedge trimmer's main parts.
Steps for unpacking, checking contents, and gathering necessary accessories.
Safe connection procedures, including extension cord use.
Defines the product's purpose and how to safely turn it on/off.
Pre-use checks, safe handling, and effective trimming techniques.
Steps to follow after operation, including cooling and storage prep.
Detailed guide for cleaning the product and its cutting device.
Maintenance and replacement guidance for the power cord and plug.
Procedures for product repair, storage, and safe transportation.
Solutions for problems like not starting, low power, or noise.
Guidelines for environmentally responsible product disposal.
Information on the product guarantee and contact details for distributors.
Key performance data, sound, and vibration values.
Explanation of the rating label and declaration of conformity.
General| Power type | Electric |
|---|---|
| Power | 550W |
| Corded/Cordless | Corded |
| Cutting width | 30 cm |
| Telescopic shaft | Yes |
| Edging facility | Yes |
| Cable Length | 10 m |
To Next Page
