EN
23
In
more
detail...
MHT55050
by MacAllister
Care and maintenance / Troubleshooting
Repair
This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualied person to have it
checked and repaired.
Storage
1. Switch the product off and disconnect it from the power supply.
2. Clean the product as described above.
3. Attach the blade cover (11) onto the cutting device (blade) (1).
4. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
5. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
6. We recommend using the original package for storage or covering the product
with a suitable cloth or enclosure to protect it against dust.
Transportation
1. Switch the product off and disconnect it from the power supply
2. Attach the blade cover (11) onto the cutting device (blade) (1).
3. Always carry the product by its handles (4, 6).
4. Protect the product from any heavy impact or strong vibrations which may
occur during transportation in vehicles.
5. Secure the product to prevent it from slipping or falling over.
Troubleshooting
Suspected malfunctions are often due to causes that the users can x themselves.
Therefore check the product using this section. In most cases the problem can
be solved quickly.
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualied specialist if you
cannot solve the problem yourself!
To Next Page
Loading...
