Need help?Do you have a question about the MachPower WL-APO2G24-061 and is the answer not in the manual?
Connects via ISP/ADSL modem for WiFi coverage, supporting PPPOE, PPTP, Dynamic IP, Static IP.
Uses PoE switch for wireless network emission and sharing, common in hotels and offices.
Repeats distal WiFi signals, sharing local WLAN, usable with routers/switches.
Acts as a wireless ISP client, connecting to a base station for WLAN sharing.
Guides users through the initial setup and configuration of the device's basic information.
Displays system status, including firmware version, build time, and system uptime.
Configure 2.4GHz wireless settings: SSID, channel, security, and broadcast options.
Manages LAN interface setup, including IP address and access type configuration.
Set time zone, view logs, upgrade firmware, and change login user name and password.
Instructions for upgrading the device's firmware, with a note about power interruption.
General| Wireless Standards | IEEE 802.11b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Antenna Gain | 6 dBi |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Interface | 1 x 10/100 Mbps Ethernet Port |
| Maximum Data Rate | 300 Mbps |
| Storage Temperature | -40°C to 70°C |
| Security | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
| Humidity | 5% to 95% (non-condensing) |
| Antenna | 2 x External 6 dBi Antennas |
To Next Page