EasyManuals Logo

Mackie Art Series ART200A Specifications

Mackie Art Series ART200A
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Art Series
Two-Way Active Speaker System
ART200A
SPEAKER
Careful acoustic design and advanced materials
have resulted in an exceptional full range, full fidelity,
self-contained sound system. The ART200A provides
an ideal combination of high power, low distortion and
wide bandwidth for permanent installations.
The two-way design consists of a 12" woofer that
uses a massive magnet structure for accurate bass
reproduction and a CD horn loaded to a 1" exit com-
pression driver. The CD horn is a part of the molded
enclosure. Two discrete power ampliers and an elec-
tronic crossover are matched to the two transducers
and provide time correction, CD horn compensation
and peak-limiting, as well as over-excursion and
thermal protection.
The ART200A will accept a balanced or unbalanced
(switch selected) microphone or line input, adjusted by
a single rotary control.
All components are housed in a lightweight, vented
enclosure formed from polypropylene that is extremely
rigid. The woofer is protected by a metal grille. All con-
trols and connectors are recessed on the rear. A 1-3/8"
stand socket and M10 threaded inserts are molded
into the cabinet to provide quick and easy installation
using specially designed accessory mounting hard-
ware.
This Mackie Industrial product is covered by an
exclusive, one-time, NO FAULT repair policy in addition
to a ve year limited warranty.
Features
90° x 70° constant-directivity horn with 1"
exit compression driver
12" high-efciency woofer
Internal bi-amplier: 120W LF, 40W HF, and
driver-optimized electronic crossover
Switchable balanced mic/line input
Total system protection: over-excursion, thermal,
short circuit and peak limiting
Compact, lightweight polypropylene enclosure
Built-in hand grip, M10 y points and stand socket
Optional installation accessories available
Exclusive Mackie Industrial one-time, NO FAULT
repair policy
Five year limited warranty
oF 6 PAGES
1
OF 6 PAGES
ART200A
APPLICATIONS
Live Sound/Music Reinforcement
High-Level AV Playback
Large Speech Systems
Active Floor Monitors

Other manuals for Mackie Art Series ART200A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mackie Art Series ART200A and is the answer not in the manual?

Mackie Art Series ART200A Specifications

General IconGeneral
Configuration2-way
Power200W
Frequency Response50 Hz - 20 kHz
Max SPL peak124 dB
Coverage Pattern90° x 60°
OutputsXLR
TypeActive
Tweeter Size1"
HF Driver Size1"
Weight15.7 kg
Power Rating200W RMS
Woofer Size12 in / 304.8 mm

Related product manuals