Mackie FUSSION 3000 User Manual

Fussion Series 3-Way Active Speaker System
FUSSION 3000
SPEAKER
FUSSION 3000
■ Mackie's FUSSION 3000 is a high-output, 3-way, medi-
um-throw, active speaker system. It features high-preci-
sion transducers combined with application-specific
amplifier technology that allows this integrated system to
generate high output levels with very low distortion char-
acteristics.
■ FUSSION 3000 transducers include a special, low
inductance, double voice-coil 8-inch, horn-loaded (80˚ x
70˚ ) midrange transducer designed to deliver the lowest
possible distortion even at full power. It operates between
500Hz and 2,500Hz, eliminating the placement of a
crossover point in the middle of critical voice frequencies.
The result is super-smooth phase and power response that
delivers extraordinary intelligibility at high output levels.
■ A 3-inch titanium diaphragm compression driver,
mounted to an 80˚ x 70˚ horn with a 1.4-inch exit throat,
reproduces frequencies above 2,500Hz.
Mackie Designs has implemented a unique “Vacuum
Tube” philosophy for amplifiers designed for mid and
high-frequency reproduction. The FUSSION 3000 features
two Trans-Fet amplifiers, one for the midrange driver and a
modified version for the high-frequency compression driv-
er. Our Trans-Fet technology combines a very simple Class
AB design topology with special transformers fitted on the
amplifier outputs, that assists in eliminating intermodula-
tion distortion by-products. This type of design emulates
the celebrated warmth and transparency of vacuum tube
amps. The result is clear, and accurate reproduction.
■ The FUSSION 3000 delivers deep, quick bass through
the use of four 12-inch high output woofers. Each 12-inch
woofer handles 350 watts RMS long term. Placing four
devices within the cabinet allows the FUSSION 3000 to
produce very deep, precise reproduction of low frequen-
cies. Using four 12-inch woofers allows low frequency
reproduction to be extremely “quick” compared to other
designs. The low frequency amplifier module is an excel-
lent example of the efficiency of active designs. This ampli-
fier uses a high-efficiency, high-current topology to pro-
duce 1500 watts of power from a module the size of a sin-
gle sheet of paper.
■ Frequency response of the FUSSION 3000 is linear
between 55Hz and 18KHz. The system processor provides
complete system management of all electronic and
acoustic functions including electronic active crossover,
electronic phase alignment, electronic time correction,
Features
■ Active, high-output, wide dispersion
3-way system
■ 80° x 70° coverage pattern
■ High output, 135dB in High Pass
Mode Operation
■ Four 12" high-precision transducers
■ Low distortion, horn-loaded 8" mid-range
transducer
■ 3" titanium diaphragm compression driver
■ 18mm birch plywood construction
■ 1500W high-efficiency, high-current amplifier
for woofers
■ 300W Trans-Fet amplifier for mid-range
■ 150W Trans-Fet amplifier for compression driver
■ On-board acoustic management control system
■ Integrated ATM hanging and flying hardware
Applications
■ Main PA
■ Fills
■ Night Clubs
■ Corporate Events
oF 6 PAGES
1
OF 8 PAGES
continued on last page

Mackie FUSSION 3000 Specifications

General

LF Driver	15" woofer
HF Amplifier Power	100 W
Type	Powered Loudspeaker
Inputs	XLR, 1/4" TRS
Outputs	XLR

Summary

FUSSION 3000 Series Introduction

System Design and Technology

A 3-way active speaker system with high-precision transducers and application-specific amplifier technology.

Transducer Configuration

Features an 8" midrange, 3" titanium HF driver, and four 12" woofers for comprehensive sound.

Amplifier and Processing

Incorporates Trans-Fet amplifiers, electronic crossover, phase alignment, and time correction.

Key Features and Applications

High output, wide dispersion, robust construction, and suitability for various venues.

FUSSION 3000 Specifications

System Acoustic Data

Details frequency range (-10dB, -3dB), coverage angles, and SPL ratings for the system.

Transducer and Amplifier Details

Lists specifications for LF, MF, and HF transducers and their respective amplifier outputs.

Audio Input/Output and Controls

Describes input connections, output signals, and control functions like phase and level.

Physical and Safety Information

Covers enclosure type, rigging, dimensions, weight, RMS limiting, and thermal monitoring.

Dispersion Characteristics

Vertical Polar Patterns

Illustrates directivity patterns at various frequencies in the vertical plane.

Vertical Off-Axis Frequency Response

Shows frequency response deviation upwards and downwards from the main axis.

Horizontal Dispersion Analysis

Horizontal Polar Patterns

Illustrates directivity patterns at various frequencies in the horizontal plane.

Horizontal Off-Axis Frequency Response

Shows frequency response deviation off the main horizontal axis.

Performance Data Graphs

Frequency Response and Distortion

Plots overall system frequency response and harmonic distortion levels.

Beamwidth vs. Frequency

Displays 6 dB beamwidth in degrees for vertical and horizontal coverage against frequency.

Directivity Index (DI) and Factor (Q)

Presents Directivity Index and Factor values across the frequency spectrum.

Dimensional Drawings

Bottom, Side, Front, and Rear Views

Provides detailed views of the speaker's physical dimensions and layout from all sides.

Input/Output Control Panel

Panel Layout and Connections

Details the input, output, control functions, and power connections for US and Euro voltage.

Architects' and Engineers' Specifications

Detailed System Requirements

Specifies transducer configuration, enclosure type, amplifier power, and system features.

Product Information and Resources

Lists available electronic files, contact details, and company information.