Need help?Do you have a question about the Mackie HR824 and is the answer not in the manual?
General| Type | Active Studio Monitor |
|---|---|
| Tweeter Size | 1 inch |
| Crossover Frequency | 1.8 kHz |
| LF Amplifier Power | 100W |
| Maximum SPL | 120 dB |
| Inputs | XLR, TRS, RCA |
| Woofer Size | 8.75 inches |
| HF Amplifier Power | 100 watts |
Information on safe listening levels and potential hearing loss from loud noise.
Highlights the benefits of the HR626's active, bi-amplified, high-resolution design.
Detailed instructions for connecting signal sources and power to the HR626 monitors.
Explains how to adjust the Acoustic Space switch based on monitor placement.
Guidance on optimal speaker placement and experimenting with settings.
Describes the types of audio inputs available and how to connect them.
How to set the input sensitivity level for optimal signal reception.
Adjusting low-frequency response based on speaker placement in the room.
Explanation of the low-frequency rolloff filter settings.
Explanation of the high-frequency equalization filter settings.
Options for controlling power on/off states (On, Auto, Standby).
Connection point for the AC power cord.
Technical explanation of the passive radiator system for bass extension.
How to use the front panel mute switch for audio control.
Explanation of the OL LED and its relation to amplifier output.
Details on the circuit that protects against excessive signal levels.
How the monitor manages heat to prevent damage.
Information on shielding and recommended cable types for signal input.
Steps to diagnose and fix power-related problems.
Steps to diagnose and fix problems where no audio is produced.
How to address issues like hum, buzz, or distorted sound.
Instructions for obtaining service and information on the product warranty.
Technical details on cabinet construction and amplifier sections.
Technical details on speaker drivers, crossover, and system specifications.
Technical details on frequency response, dimensions, and power.
To Next Page
