Need help?Do you have a question about the Mackie Thump12 and is the answer not in the manual?
General| Max SPL | 126 dB |
|---|---|
| Woofer Size | 12 inches |
| Tweeter Size | 1.4 inches |
| Type | Powered Loudspeaker |
| Output Connectors | 1x XLR (Mix Out) |
| Enclosure Material | Polypropylene |
| Frequency Response | 50 Hz - 20 kHz |
| Input Connectors | XLR, 1/4" TRS, RCA |
Essential safety precautions for operating and maintaining the loudspeakers, covering usage, cleaning, and installation.
Highlights critical safety warnings regarding electric shock, fire hazards, and operational risks.
Information on safe noise exposure levels to prevent permanent hearing loss during operation.
Step-by-step guide for connecting and powering on Thump loudspeakers and other equipment.
Explains how to connect multiple Thump loudspeakers in series using the THRU output.
Details the IEC power connector, AC matching, and the rocker power switch operation.
Describes the combo input for balanced/unbalanced XLR and 1/4" connections, including wiring.
Details the male XLR THRU output for daisy-chaining signals to other loudspeakers.
Explains the level control for adjusting signal level and the OL LED for overload indication.
Guidance on setting up loudspeakers on floors, stages, or pole mounts, avoiding suspension.
Details the built-in limiter, compression circuit, and subsonic filter for speaker protection.
Guides users through diagnosing and resolving common problems like no power or no sound.
Details XLR and 1/4" combo inputs, including balanced/unbalanced wiring and TRS/TS connectors.
To Next Page
