Need help?Do you have a question about the Mackie Thump 12A and is the answer not in the manual?
Accepts balanced mic or line-level signals via XLR or 1/4" connectors.
Adjusts input sensitivity for mic/line inputs, allowing optimal internal operating levels.
Adjusts overall signal level to the power amplifiers, from Off to MAX gain.
Guides for resolving common issues like no power, no sound, poor sound, noise, and hum.
Accepts balanced mic or line-level signals via XLR or 1/4" connectors.
Adjusts input sensitivity for mic/line inputs, allowing optimal internal operating levels.
Adjusts overall signal level to the power amplifiers, from Off to MAX gain.
Guides for resolving common issues like no power, no sound, poor sound, noise, and hum.
General| Configuration | 2-way |
|---|---|
| Woofer Size | 12" |
| HF Driver Size | 1.4" |
| Max SPL | 126 dB |
| Enclosure Material | Polypropylene |
| Type | Powered Speaker |
| Frequency Response | 50Hz - 20kHz |
| Inputs | XLR, 1/4" combo, RCA |
| Outputs | XLR |
| Weight | 29.1 lbs |
| Power Output | 1300W (Peak) |
To Next Page
