Need help?Do you have a question about the Mackie Thump 15 and is the answer not in the manual?
General| Type | Powered Loudspeaker |
|---|---|
| Woofer Size | 15 inches |
| Inputs | 2 x XLR/TRS Combo |
| Outputs | XLR |
| Frequency Response | 32 Hz - 23 kHz |
Highlights 1000W total power, gig-ready design, and ultra-efficient Class-D amplification.
Details the 12" or 15" woofer, titanium dome driver, and dynamic bass response.
Covers crossover, time alignment, and system protection/limiting for optimized performance.
Describes 3-band EQ, mic/line input, mounting options, and stage monitor capability.
Details rugged polypropylene construction and product weights for Thump12 and Thump15.
Guides users on how to use the manual and understand its layout.
Provides step-by-step instructions for connecting and powering on the loudspeakers.
Offers advice on listening habits, power sequencing, and saving materials for future use.
Illustrates connecting a mixer to two Thump12 loudspeakers for a small club setup.
Shows connecting a mixer to a subwoofer, then to Thump12 loudspeakers for enhanced bass.
Depicts connecting a laptop and headphones to a mixer and then to subwoofers and speakers.
Explains and illustrates daisy-chaining multiple Thump loudspeakers via the THRU connector.
Details connecting a mixer to subwoofers and speakers for a large club setup.
Describes the IEC power connector and the rocker power switch operation.
Explains the function of the green LED indicating the loudspeaker is on.
Details the versatile combo input jack for microphones and line-level signals.
Explains the male XLR connector for daisy-chaining signals to other loudspeakers.
Describes the level control for signal adjustment and the overload indicator.
Details the Low EQ (80 Hz) and Mid EQ (100 Hz-8 kHz) controls.
Covers the Mid Freq selector and the Hi EQ (12 kHz) control.
Provides recommended EQ settings for various common applications.
Advises on floor or pole-mounting and warns against suspension or handle rigging.
Offers tips on protecting from moisture, cold, and cleaning procedures.
Explains limiter, overexcursion, and thermal shutdown for loudspeaker protection.
Details voltage, amperage, and grounding needs for proper operation.
Provides guidance for common problems like no power, no sound, poor sound, noise, and hum.
Directs users to warranty service, authorized centers, and contact information.
Details wiring for balanced XLR, unbalanced 1/4" TS, and balanced 1/4" TRS input connectors.
Explains the male XLR output connector and the process of daisy-chaining speakers.
Lists frequency range, coverage, SPL, input type, impedance, and level control details.
Details rated power for LF/HF amps, design, crossover type, and frequency.
Covers dimensions, weight, construction, operating temperature, and available accessories.
Provides detailed measurements for the Thump12 model, including height, width, and depth.
Provides detailed measurements for the Thump15 model, including height, width, and depth.
Displays the frequency response graph for the Thump12 loudspeaker.
Displays the frequency response graph for the Thump15 loudspeaker.
Illustrates the internal signal flow from input to amplifier and driver.
Outlines warranty coverage, limitations, and claims procedures for the product.
Provides contact details and website links for technical support and FAQs.
To Next Page
