Need help?Do you have a question about the Mackie Thump15BST and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | - |
| Woofer | Yes |
| Driver diameter | 35.5 mm |
| Number of drivers | 1 |
| Speaker placement | Ceiling-mountable, Stand-mountable |
| Audio output channels | - channels |
| Woofer diameter (imperial) | 15 \ |
| RMS rated power | 1300 W |
| Amplifier class | D |
| Connectivity technology | Wired & Wireless |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
Weight and Dimensions| Width | - mm |
|---|---|
| Weight | 15900 g |
Details on 1300W peak power, switch-mode power supply, and Power Factor Correction.
Information on 12/15-inch low-frequency drivers and 1.4-inch titanium dome compression driver.
Details on dynamic DSP bass boost and system protection features.
Overview of the rear panel control screen, knob interface, and digital mixer.
Information on Bluetooth streaming, stereo linking, and Thump Connect app control.
Step-by-step guide for quickly setting up the loudspeakers.
Example setup for a singer-songwriter using a microphone and guitar.
Diagrams for connecting mixers to loudspeakers for small clubs and parties.
Example setup for a DJ system using Bluetooth and stereo linking.
Explanation of XLR and 1/4-inch combo inputs for various audio sources.
Guide to adjusting High, Mid, Low, and HPF settings for each channel.
Explanation of speaker modes for tailoring sound to specific applications.
Steps for pairing a Bluetooth device with the loudspeaker.
Instructions on how to link two ThumpBST loudspeakers wirelessly.
Guide to selecting between Zone and Stereo modes for wireless linking.
Common issues and solutions for power, sound, noise, hum, and Bluetooth problems.
To Next Page
