Mackie SRM V-CLASS Series User Manual

SRM | V-Class High-Performance Powered Loudspeaker Series
8
SRM | V-Class High-Performance Powered Loudspeaker Series
Daisy-Chaining Multiple SRM | V-Class Loudspeakers
Hookup Diagrams continued…
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
USB 1-2
USB 3-4
MUTE
MUTE MUTE MUTE
MUTEMUTE MUTE
ProFX10v3 Mixer
To next
SRM | V-Class
loudspeaker
input
To next
SRM | V-Class
loudspeaker
input
Main
Outs
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
CH1
CH2 CH3/4
PUSH FOR SETTINGS
MAXOFF
SPEAKER CONTROL
GAIN
LINE MIC
MAXOFF
U
LINE
MAXOFF
U
To next
SRM | V-Class
loudspeaker
input
SRM | V-Class loudspeakers may be daisy-chained via the male XLR connector labeled “DIRECT OUT” (which sends
only the signal from the input located above it) or via the “MIX OUT” which outputs all inputs. Simply plug the signal
source (i.e., mixer output or microphone) into the input jack(s), and patch that loudspeaker’s direct out or mix out jack
to the next loudspeaker’s input jack, and so on, daisy-chaining multiple SRM | V-Class loudspeakers. See above for visual
representations of daisy-chaining.
NOTE: Make sure to set the gain knob(s) correctly. In the top diagram, input channel  is set to “LINE” and in the bottom
diagram, input channel  is set to “MIC”.

Mackie SRM V-CLASS Series Specifications

General

Brand	Mackie
Model	SRM V-CLASS Series
Category	Speakers
Language	English