Mackie SRM350v3 User Manual

2/9 PAGES
SRM350v3
SRM450v3
1000W High-Definition
Powered Loudspeakers
SRMv3 LOUDSPEAKER SPECIFICATIONS
Acoustic Performance
Frequency Response (–3 dB) 55 Hz – 20 kHz [SRM350v3]
47 Hz – 20 kHz [SRM450v3]
Frequency Response (–10 dB) 50 Hz – 23 kHz [SRM350v3]
42 Hz – 23 kHz [SRM450v3]
Max peak SPL 126 dB [SRM350v3]
128 dB [SRM450v3]
Crossover Point 3 kHz
Dispersion (H x V) 90˚ x 80˚ [SRM350v3]
90˚ x 45˚ [SRM450v3]
High-Frequency Section
Compression Driver 1.4 in / 36 mm
Diaphragm Material Titanium
Magnet Material Ferrite
Low-Frequency Section
Woofer Diameter 10.0 in / 254 mm [SRM350v3]
12.0 in / 305 mm [SRM450v3]
Cone Material Paper
Magnet Material Ferrite
Power Amplifiers
System Power Amplification
Rated Power 500 watts rms
1000 watts peak
Low Frequency Power Amplifier
Rated Power 400 watts rms
800 watts peak
Rated THD < 1%
Cooling Convection
Design Class D
High Frequency Power Amplifier
Rated Power 100 watts rms
200 watts peak
Rated THD < 1%
Cooling Convection
Design Class AB
Input / Output
Channel 1
Mic-Line 8 k
balanced
1/4" TRS, Wide-Z
™
1 M unbalanced
Channel 2
Mic-Line 8 k
balanced
1/4" TRS, Wide-Z
™
1 M unbalanced
RCA 25 k
unbalanced
Thru Male XLR balanced
[Passive when the Ch 1 / Mix switch
is in the “out” (Ch 1) position]
[Active when the Ch 1 / Mix switch
is in the “in” (Mix) position]
Power
US detachable line cord 100 – 120 VAC, 50 – 60 Hz, 160W
EU detachable line cord 220 – 240 VAC, 50 – 60 Hz, 160W
AC Connector 3-pin IEC 250 VAC, 10 A male
Power Supply Type Switchmode
Operating Temperature 0 - 40 ˚C
[extended ambient temperature] 32 - 104 ˚F
Safety Features
Input Protection Peak and RMS limiting, power supply
and amplifier thermal protection
Display LEDs Defeatable front power, input
signal/OL, speaker mode,
feedback destroyer on/off and
active filters, system limiter
Construction Features
Cabinet Polypropylene
Finish Black, textured finish
Grille Perforated metal with
weather-resistant coating
Fly Points Three M10 x 1.5 x 20 mm [SRM450v3]
Monitor Angle 50˚ [SRM350v3]
40˚ [SRM450v3]

Mackie SRM350v3 Specifications

General

Product color	Black
Recommended usage	Universal
Suitable for outdoor use	-
Woofer	Yes
Magnet type	Ferrite
Speaker type	2-way
Number of drivers	2
Speaker placement	Tabletop/bookshelf
Audio output channels	2.0 channels
Number of woofer drivers	1
Woofer diameter (imperial)	10 \
Impedance	8 Ω
Sensitivity	126 dB
Frequency range	55 - 20000 Hz
RMS rated power	500 W
Crossover frequency	3000 Hz
Peak Music Power Output (PMPO)	1000 W
Connectivity technology	Wired
Current	10 A
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (typical)	160 W
Operating temperature (T-T)	0 - 40 °C
Package depth	335 mm
Package width	386 mm
Package height	635 mm
Package weight	13200 g

Weight and Dimensions

Depth	311 mm
Width	333 mm
Height	527 mm
Weight	10400 g