Need help?Do you have a question about the Mackie SRM450v2 and is the answer not in the manual?
General| Enclosure Material | Polypropylene |
|---|---|
| LF Driver | 12 in |
| HF Driver | 1.4" |
| Type | Active |
| Input Impedance | 20 kOhms balanced, 10 kOhms unbalanced |
| Inputs | XLR, 1/4" TRS |
| Power Output | 400W (200W LF, 200W HF) |
| Amplifier Power | 400W total (200W LF, 200W HF) |
Details equipment tested for Class B digital device limits and interference correction.
Warns of hearing loss from high noise levels and provides OSHA exposure limits.
Emphasizes safe electrical practices to prevent fire, shock, and damage.
Explains the Class-D and Class AB amplifiers, including wattage, compressors, and servo feedback.
Step-by-step instructions for initial setup and connection of the loudspeaker.
Describes the AC power input socket and the main power switch functions.
Explains the CONTOUR (bass/treble boost) and LOW CUT (75Hz filter) switch functions.
Discusses AC voltage requirements, current draw, and the need for a stiff AC supply.
Guides on checking power connections, switch status, and illuminated indicators for power issues.
Addresses issues like low level control, cable connections, and blocked ventilation causing no sound.
To Next Page
