Need help?Do you have a question about the Mackie SRM450v3 and is the answer not in the manual?
General| Woofer | Yes |
|---|---|
| Tweeter | - |
| Magnet type | Ferrite |
| Speaker type | 2-way |
| Speaker placement | Tabletop/bookshelf |
| Audio output channels | 2.0 channels |
| Number of woofer drivers | 1 |
| Woofer diameter (imperial) | 10 \ |
| Product color | Black |
| Recommended usage | Universal |
| Impedance | 8 Ω |
| Sensitivity | 128 dB |
| Frequency range | 47 - 20000 Hz |
| RMS rated power | 500 W |
| Crossover frequency | 3000 Hz |
| Peak Music Power Output (PMPO) | 1000 W |
| Connectivity technology | Wired |
| Current | 10 A |
| AC input voltage | 220 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 160 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Package depth | 432 mm |
| Package height | 737 mm |
| Package weight | 19500 g |
Weight and Dimensions| Depth | 376 mm |
|---|---|
| Width | 406 mm |
| Height | 663 mm |
| Weight | 16800 g |
Equipment compliance with FCC and Canadian radio noise emission regulations.
Information on exposure to high noise levels and recommended hearing protection.
Guidelines for recycling waste electrical and electronic equipment (WEEE directive).
How to connect power and operate the main power switch.
Description of XLR/1/4" combo inputs for microphones and line-level signals.
How to use the gain knobs to set input sensitivity for different sources.
Information on connecting stereo unbalanced RCA inputs for line-level sources.
Description of the male XLR output for daisy-chaining multiple SRM loudspeakers.
How to choose between PA, DJ, Monitor, and Soloist modes for tailored sound.
Details on the automatic feedback hunting and elimination feature.
Functionality of the limit indicator and the front panel LED switch.
How compression circuits and high-pass filters protect drivers from damage.
Description of the thermal switch that mutes the signal when overheating occurs.
Key considerations for designing and implementing safe rigging systems.
Information on necessary third-party hardware and accessory items.
Important considerations for using mounting points and supporting loads.
Steps to diagnose and resolve issues with power and audio signal.
Guidance on identifying and fixing noise and hum, possibly from ground loops.
Details on obtaining warranty and non-warranty service for the loudspeakers.
Standards for balanced XLR inputs/outputs and 1/4" TRS connections.
Standards for unbalanced 1/4" TS and RCA connections.
Details on frequency response, SPL, crossover, and dispersion characteristics.
Information on power ratings, THD, input/output types, and impedance.
Overview of safety features, cabinet materials, and monitor angles.
To Next Page
