Need help?Do you have a question about the Mackie SRM550 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Recommended usage | - |
| Woofer | Yes |
| Speaker type | 2-way |
| Woofer diameter | 305 mm |
| Speaker placement | Floor, In-wall/in-ceiling |
| Audio output channels | 1.0 channels |
| Woofer diameter (imperial) | 12 \ |
| Impedance | - Ω |
| Frequency range | 55 - 17000 Hz |
| RMS rated power | 800 W |
| Total Harmonic Distortion (THD) | 1 % |
| Connectivity technology | Wired |
| AC input voltage | 200 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Operating temperature (T-T) | 0 - 40 °C |
Weight and Dimensions| Depth | 480 mm |
|---|---|
| Width | 465 mm |
| Height | 627 mm |
| Weight | 20000 g |
Standard 3-prong IEC power connector for connecting detachable power cord to AC outlet.
Rocker switch to turn the loudspeaker on or off. Front panel logo illuminates when on.
Versatile inputs accepting balanced/unbalanced XLR and 1/4" connections for various signal levels.
Determines rigging methods, hardware, design factor, and Working Load Limit.
Discusses third-party load-rated hardware and accessory items for installation.
Explains integral mounting points and support requirements for loudspeakers.
Provides guidance for resolving issues like no power, no sound, poor bass, poor sound, noise, and hum.
Details wiring standards for balanced XLR input connectors on the loudspeakers.
Describes wiring standards for the male XLR "THRU" output connector.
Explains wiring standards for balanced 1/4" TRS connectors for stereo or balanced signals.
To Next Page
