MACO COMET
PACKING LIST
PART QTY OD SIZE LENGTH DESCRIPTION CHECKLIST
T59P 1 1 ½” .050” 72” ALUM. TUBING SWAGED ONE END ____
T28 1 1 ½” .050” 72” ALUMINUM TUBING ____
T11P 6 5/8” .050” 72” ALUM. TUBING SLOTTED BOTH ENDS ____
T01 8 ½” .050” 72” ALUMINUM TUBING ____
P01P 1 ¼” x 5 5” 1 ½” BOOM TO 1 ½” MAST PIPE ____
W04P 1 7/14 40” COPPER WIRE ____
FA1P 4 48” FIBERGLAS RODS ____
G01P 2 11 METER GAMMA MATCHES ____
Z08P 4 GAMMA STRAPS W/COAX CONNECTORS ____
S42 2 COAX CONNECTOR W/MOUNTING NUT ____
HARDWARE BAG #1
U02 10 1 ½” PLATED U-BOLTS ____
S02 10 1 ½” PLATED SADDLES ____
N03 20 5/16” LOCK NUTS ____
HARDWARE BAG #2
BE1P 6 1 ½” BOOM TO ELEMENT MOUNT ____
W58P 12 5/8” ALUMINUM CLAMPS ____
PL2 8 .437” PLASTIC CAPS – BLACK ____
PL4R 1 1 ½” PLASTIC CAP – RED ____
PL4B 1 1 ½” PLASTIC CAP – BLACK ____
S21 13 10-24 ½” MACHINE SCREWS ____
N11 13 10-24 SQUARE NUTS ____
N12 7 #10 LOCK WASHERS ____
N26 7 #10 FLAT WASHERS ____
Z02P 4 ½” GAMMA STRAPS ____
1 FIBERGLASS ROD KIT (4 SCREWS) ____
1 WARRANTY SHEET ____
1 INSTRUCTION SHEET ____
1 TIP SHEET ____
Please note: In an effort to keep the price on Maco Antennas down, we have decided not to clean up all the burrs and
rough edges on the parts. We recommend that you deburr and clean up each part with files, sandpaper, etc. so that they
go together easily. We are aware this needs to be done but have elected not to do it to save you the money we would
have to add to the price of the kit for this service.
Rev 05/09
To Next Page
Loading...
