What to do if my Macrom M-DVD7702 GPS player skips audio or video?
If your Macrom GPS player skips audio or video, make sure the unit is installed firmly. Also, the disc might be dirty or damaged, so try cleaning it or using a different one.
How to fix a Macrom M-DVD7702 GPS that won’t turn on?
If your Macrom GPS isn't powering on, check that all the leads and connectors are correctly connected. Also, examine the power cable's fuse; if it has blown, replace it with a new one of the same capacity. Finally, try resetting the unit by pressing the RESET button with the tip of a pen in case outside factors are causing the unit to operate incorrectly.
Why is playback not possible on my Macrom M-DVD7702 GPS?
If playback isn't possible on your Macrom GPS, clean the disc first. If that doesn't work, check the disc type against the Technical Specifications to ensure it's compatible with the unit. Also, verify that the disc's video system is compatible. Finally, check the speaker connections, including any connections to an amplifier if one is in use.
What to do if the Macrom M-DVD7702 remote control isn't working?
If you can't use the remote control with your Macrom GPS, the first thing to check is the batteries. Try loading new batteries. If that doesn't work, some operations might be prohibited with the disc you are using, so try another disc.
What to do if Macrom GPS pictures stop and the unit is inoperable?
If the picture on your Macrom GPS stops or pauses and the unit becomes unresponsive, it may be due to a reading error during playback. Try pressing STOP once, then starting playback again.
Why is there no sound during fast forward/rewind on Macrom GPS?
If there is no sound during fast forward or rewind playback on your Macrom GPS, it may be because some discs prohibit 96 kHz output. Try switching the output setting to 48 kHz.
Why are subtitles not displayed on my Macrom GPS?
If no subtitle is displayed on your Macrom GPS, it is because the DVD playing does not have subtitles. Subtitles are not displayed if they are not recorded on the disc. Also, you can only select between options indicated in the disc menu, so select using the disc menu.
Why is the picture unclear and dark during Macrom GPS playback?
If the picture on your Macrom GPS is extremely unclear, distorted, and dark during playback, it's likely because the disc has a signal to prohibit copying. This unit is compatible with copy guard analogy copy protect system, so when playing a disc that has a signal prohibiting copying, the picture may suffer from horizontal stripes or other imperfections when viewed on some displays. This does not mean this unit is malfunctioning.
Instructions for safely replacing the unit's fuse.
Explains the function of each button and interface on the front panel.
Information on using the Radio Data System features.
Explains the functions of various buttons on the remote control.
Specific issues encountered during DVD playback and their resolutions.
To Next Page
General
