12
GD-2B and Heating Gases: Propane and Methane
Designed to meet UL standard 2075 for the Standard
For Safety for Gas and Vapor Detector and Sensors
Sensitivity based on UL 1484 Standard for Residential
Gas Detectors - Alarm set point: 25% LEL
Test & Reset switch conducts internal tests and
actuates alarm relay
Solid State Electronic sensors: no maintenance or
recalibration
Can be self-restoring or latching
Optional Buzzer: Produces repeating loud tone bursts
during alarm, and chirps if sensor trouble is found
Gas boilers, furnaces, water heaters, clothes dryers, fireplaces and
stoves are usual sources of gas leaks. The GD-2B can detect gas from
these sources, as well as any other sources of combustible gas